Reliable, versatile and powerful.
Shorter evacuations. More business.
Pick up a VP67 Vacuum Pump if you want to make more service calls per day. This new lightweight, portable and powerful pump performs system evacuations faster, freeing you up to visit more customers. It has a wide, sturdy base, powerful motor and the legendary Fieldpiece toughness masters of the trade have come to expect.
Change oil on the fly.
Since it’s a Fieldpiece vacuum pump, the VP67 uses our revolutionary RunQuick® Oil Change System. This allows you to change the pump’s oil in 20 seconds without making a mess and without turning off the pump. Never lose vacuum again.
Small and mighty.
With a small footprint, the VP67 can go just about anywhere, along with its ½ HP AC motor that has all the power you need to quickly pull a deep vacuum. Plus, it comes with four in-line ports to make hose routing easy — even for three different size hoses.
You need one of the industry’s best pumps.
What’s Included
• (1) VP67 Vacuum Pump
• (2) 8 oz. oil
• (1) Appropriate plug based on country
Read More
Reliable, versatile and powerful.
Shorter evacuations. More business.
Pick up a VP67 Vacuum Pump if you want to make more service calls per day. This new lightweight, portable and powerful pump performs system evacuations faster, freeing you up to visit more customers. It has a wide, sturdy base, powerful motor and the legendary Fieldpiece toughness masters of the trade have come to expect.
Change oil on the fly.
Since it’s a Fieldpiece vacuum pump, the VP67 uses our revolutionary RunQuick® Oil Change System. This allows you to change the pump’s oil in 20 seconds without making a mess and without turning off the pump. Never lose vacuum again.
Small and mighty.
With a small footprint, the VP67 can go just about anywhere, along with its ½ HP AC motor that has all the power you need to quickly pull a deep vacuum. Plus, it comes with four in-line ports to make hose routing easy — even for three different size hoses.
You need one of the industry’s best pumps.
What’s Included
• (1) VP67 Vacuum Pump
• (2) 8 oz. oil
• (1) Appropriate plug based on country
Specifications
Empty or replace oil at the end of every job. Don’t leave old oil in the machine. Store the pump and oil in dry clean areas for longest life. Oil can lose its sealing properties if left uncovered. Keep oil sealed until it’s ready for use. Change oil while pulling a vacuum if the oil is dirty and your vacuum slows down. Oil can be changed while pump is in use without losing a vacuum.
Yes. Call Fieldpiece at 714-634-1844 for more information.
VP67 is 29 pounds, VP87 is 27 pounds, VPX7 is 24 pounds. The VPX7 is so light weight due primarily to the aluminum alloy pump that has the EPO coating (patent pending). The coating makes the aluminum alloy pump durable and strong, and the aluminum alloy is lighter than the cast iron pumps that VP87 and VP67 have. The reason the VP87 and VPX7 are still lighter than the VP67 is because they have DC motors whereas the VP67 has the heavier AC motor. Weight is important because HVACR techs have to carry the pump up ladders on roofs, so having a light weight product makes their job easier. A DC is lighter and also is a motor packs more power and is friendlier in a low voltage situation and better for cold starts.
Excessive moisture is present in the oil indicating that the oil needs to be replaced.
Fieldpiece oil is optimized for its pump – has a specific viscosity for maximum performance, you can use others but not recommended.
Much of the air and moisture in a system are removed before reaching 3000 microns. For wet systems, you should open the gas ballast during this initial pull down. Doing so helps the pump run smoothly and keeps the oil in good condition for when you need it most – towards the end of the evacuation. At about 3000 microns, when the sound of the pump quiets down, the gas ballast should be closed so that a deep vacuum can be achieved.
A common complaint we hear about oil sealed rotary vane pumps is that they create a lot of “smoke” from the exhaust. What is commonly reported as “smoke” is often actually oil mist vapor.
The oil in your rotary vane pump both lubricates the moving parts and seals the fine clearances in the pump. Oil has the benefit of stopping air leakages inside of the pump, however the rigorous oil flow during operation creates an oil mist on the exhaust side of the pump.
It is normal for the pump to emit vapor when pumping on a chamber from atmosphere. Since all the air that is removed from the chamber by the pump moves through the oil in the oil reservoir some of that oil is vaporized when a lot of air is moving through it. When the pressure in the chamber is reduced to a few hundred torr, the oil vapor or “mist” should reduce dramatically.
When ports are facing you, from left to right are ¼”, ½”, 3/8”, 3/8“
Yes, but we do not advise using the pump if more than 15 PSI of pressure is present at pump.
Perform this test to ensure VP67/VP87/VPX7 and your micron gauge are working properly.
If your gauge measures below 200 microns within 1 minute, you know VP67/VP87/VPX7 and your micron gauge are working correctly. If your gauge does not reach 200 microns, there is a problem with your gauge, VP67/VP87/VPX7 , or all three.
Yes, it is A2L certified. For use only by qualified and certified technicians in the safe use, handling, and transporting of refrigerants. Please refer to flammable refrigerant safety guides, regional codes and legislation for more information.
